Module summary
Module name:
Internal number:
Coordinator:
Extent:
Semester:
Pre-requisites with regard to content: Internship, Internship Preparation and Roundup
Pre-requisites according to the examination regulations:
Module Internship
Competencies:

The student should be able to lay his emphasis on individual interests.

Assessment:
Individual exams
Course: Advanced Embedded Software
Internal number: I W300 Type/mode: Lecture
Lecturer:
Prof. Dr. Dirk Hoffmann
Language of instruction:
German
Credits (ECTS): 2 Contact hours: 2
Assessment: Written Exam 90 Min. (graded)
Content:
The lecture introduces the concepts of digital signal processors (DSPs). Specifically, the following topics are covered: History, DSP core principles, integer and floating point number representation, digital filter, vertex shader, Low-power design
Recommended reading:
Slides, blackboard, exercise sheets
Comments: LectureThis course is either not offered in Summer semester 2021, or the date is not yet fixed in case of a block course.
Course: Augmented and virtual reality
Internal number: I W171 Type/mode: Lecture
Lecturer:
Prof. Dr. Matthias Wölfel
Language of instruction:
German
Credits (ECTS): 4 Contact hours: 4
Assessment: Written Exam 90 Min. (graded)
Content:
Recommended reading:
Comments:
Course: Business Process Management
Internal number: I W854 Type/mode: Lecture
Lecturer:
Prof. Dr. Uwe Haneke
Language of instruction:
German
Credits (ECTS): 2 Contact hours: 2
Assessment: Written Exam 90 Min. (graded)
Content:
Based on the theoretical fundamentals of business process management students learn to work with business processes by using different software-tools such as ARIS or ARENA.
  • Defining a business process and types of business processes
  • Analyzing business processes
  • Modelling business processes
  • Tools for modelling business processes
  • Simulating business processes with ARENA
  • Enterprise SOA: SAP’s vision of a service-oriented-architecture
  • KPI’s for the evaluation of business processes
Recommended reading:

Comments: Lecture combined with exercise sessions and case studies
Course: Calligraphy
Internal number: MKIB651.r Type/mode: Lecture
Lecturer:
Prof. Thomas Hinz
Language of instruction:
German
Credits (ECTS): 2 Contact hours: 2
Assessment: Written Exam 90 Min. (graded)
Content:
Recommended reading:
Comments: This course is either not offered in Summer semester 2021, or the date is not yet fixed in case of a block course.
Course: CC Operation
Internal number: I W917 Type/mode: Lecture
Lecturer:
Dr. Günther Schreiner
Language of instruction:
German
Credits (ECTS): 2 Contact hours: 2
Assessment: Written Exam 90 Min. (graded)
Content:
Recommended reading:
Comments:
Course: Concept, Design und Presentation of interactive Projects
Internal number: I W915 Type/mode: Lecture
Lecturer:
Prof. Thomas Hinz
Language of instruction:
German
Credits (ECTS): 2 Contact hours: 2
Assessment: Homework 1 Semester (graded)
Content:
Recommended reading:
Comments:
Course: Databases Special Chapters
Internal number: I W907 Type/mode: Lecture
Lecturer:
M.Sc. Tobias Wink
Language of instruction:
German
Credits (ECTS): 2 Contact hours: 2
Assessment: Written/verbal Exam 90/20 Min. (graded)
Content:
Recommended reading:
Comments: This course is either not offered in Summer semester 2021, or the date is not yet fixed in case of a block course.
Course: ERP Special Chapters
Internal number: I W182 Type/mode: Lecture
Lecturer:
Prof. Dr. rer. pol. Mathias Philipp
Language of instruction:
German
Credits (ECTS): 2 Contact hours: 2
Assessment: Written Exam 90 Min. (graded)
Content:

Enterprise analysis, software choice, system integration, basics of customizing, small development task in ABAP in addition to an ABAP introduction, optional: project office: integrated project and service processing with SAP ECC 6.0

Recommended reading:

Lecture material completely as pdf documents, blackboard notes for interactive development of central problem positions, extensive material for every case study.

Comments:

Lecture, workshops, lab:

Case study based participation in group oriented workshops about enterprise analysis, presentation of group results, independent implementation of the analysis results of into SAP by appropriate system customizing in the lab. Independent treatment of another lab task (e.g., ABAP course, case study project office)

This course is either not offered in Summer semester 2021, or the date is not yet fixed in case of a block course.
Course: Graphical-geometric algorithms
Internal number: I W158 Type/mode: Lecture
Lecturer:
Prof. Dr. Christian Pape
Language of instruction:
German
Credits (ECTS): 2 Contact hours: 2
Assessment: Written/verbal Exam 90/20 Min. (graded)
Content:
Recommended reading:
Comments:
Course: Graphical User Interfaces
Internal number: I W332 Type/mode: Lecture
Lecturer:
Dipl.-Inf. Per Sterner
Language of instruction:
German
Credits (ECTS): 2 Contact hours: 2
Assessment: Written Exam 90 Min. (graded)
Content:

The lecture first deals with SWT/JFace and the Eclipse Rich Client Platform 4 (RCP), which uses SWT and JFace as its basis. The most important topics are the model-view-controller pattern, layout management and event handling using the observer pattern. Based upon this techniques advanced technologies like the separation of business logic and user interface code using data binding and dialog control are presented. Other topics are internationalization and multithreading in the context of user interfaces. The last part of the lecture shows the declarative construction of user interfaces and the application of the RCP framework.

Recommended reading:

Books and Web sites:

  • Marc Teufel, "Eclipse 4", entwickler.press, Oktober 2012
  • Lars Vogel, "Eclipse 4 Application Development", Mai 2012
  • M. Marinilli, "Professional Java User Interfaces", Wiley & Sons, 2006
  • R. Warner, R. Harris, "The Definite Guide to SWT and JFace", Apress, 2007
  • M. Scarpino et.al., "SWT/JFace in Action", Manning Publications Co., 2005
  • J. McAffer, J. M. Lemieux, "Eclipse Rich Client Platform", Addison-Wesley Longman (Pearson Education), 2010
  • G. Wütherich, N. Hartmann, B. Kolb, M. Lübken, "Die OSGi Service Platform", dpunkt-Verlag, 2008
  • http://www.ralfebert.de/rcpbuch/
  • http://www.eclipse.org/swt/
  • http://www.eclipse.org/articles/Article-UI-Guidelines/Index.html
  • http://www.eclipse.org/swt/snippets/
  • http://wiki.eclipse.org/index.php/JFaceSnippets
  • http://www.java2s.com/
Comments:

Lecture preparation, exam preparation, implementing the bonus exercise, 30% of the lecture is held as a computer exercise

This course is either not offered in Summer semester 2021, or the date is not yet fixed in case of a block course.
Course: HsKA-App (HsKAmpus)
Internal number: I W155 Type/mode: Practical work
Lecturers:
MSc Daniel Weisser
Prof. Dr. Manfred Seifert
Language of instruction:
German
Credits (ECTS): 2 Contact hours: 2
Assessment: Hands-on Work 1 Semester (graded)
Content:
Recommended reading:
Comments: This course is either not offered in Summer semester 2021, or the date is not yet fixed in case of a block course.
Course: In-memory Databases
Internal number: I W920 Type/mode: Lecture
Lecturer:
Prof. Dr. Zoltán Nochta
Language of instruction:
German
Credits (ECTS): 2 Contact hours: 2
Assessment: Written Exam 90 Min. (graded)
Content:
Recommended reading:
Comments: This course is either not offered in Summer semester 2021, or the date is not yet fixed in case of a block course.
Course: IT Consulting
Internal number: I W433 Type/mode: Lecture
Lecturer:
Prof. Dr. rer. pol. Mathias Philipp
Language of instruction:
German
Credits (ECTS): 2 Contact hours: 2
Assessment: Written Exam 90 Min. (graded)
Content:

Consulting market, basic methods and analysis tools, peculiarities of IT consulting, basis types of case studies.

Recommended reading:

Lecture material completely as pdf documents, blackboard notes for interactive development of central problem positions, instructions for interactive role play and case study material

Comments:

Participation lecture, development of an interactive role play in the group, individual execution of a short case study.

Course: IT Security
Internal number: I W210 Type/mode: Lecture
Lecturers:
Dipl. Inform. (FH) Michael Fischer
Dipl. Inform. (FH) Georg Magschok
Language of instruction:
German
Credits (ECTS): 2 Contact hours: 2
Assessment: Written Exam 90 Min. (graded)
Content:

Technological and topological mechanisms for securingnetworks, attack patterns and defense mechanisms againstthem. Basics of, variants of and defense against malicioussoftware. Analysis and judgement of security mechanismsand related activities. Excercies at the end of each semester provide practicalexperience in dealing with security topics.

Recommended reading:
Comments:

Presentation with a lot of room for discussions andinteraction. Finalized by a hands-on session.

This course is either not offered in Summer semester 2021, or the date is not yet fixed in case of a block course.
Course: Microservices
Internal number: I W930 Type/mode: Lecture
Lecturer:
Prof. Dr. Jürgen Zimmermann
Language of instruction:
German
Credits (ECTS): 2 Contact hours: 2
Assessment: Written Exam 90 Min. (graded)
Content:
Recommended reading:
Comments:
Course: Mobile communication
Internal number: I W914 Type/mode: Lecture
Lecturer:
Prof. Dr. Oliver P. Waldhorst
Language of instruction:
German
Credits (ECTS): 2 Contact hours: 2
Assessment: Verbal Exam 20 Min. (graded)
Content:
Recommended reading:
Comments:
Course: Model-based Software Development
Internal number: I W911 Type/mode: Lecture
Lecturer:
Prof. Dr. Martin Sulzmann
Language of instruction:
German
Credits (ECTS): 2 Contact hours: 2
Assessment: Written Exam 90 Min. (graded)
Content:

  • Formal Modelling Languages
    • Synchronous languages (Lustre/SCADE)
    • Temporal Specifications (LTL)
  • Domain-specific Extensions
    • Textual versus visual modelling
    • Modeltransformation via internal DSLs
    • Modelling guide lines
  • Formal testing and verification
    • Coverage criteria
    • Testcasegeneration
    • Static analysis and model-checking

Recommended reading:

  • lectures notes and slides
  • exercies
  • online references
Comments:

Prerequisistes:
  • UML Basics
  • C++,
  • Logic (propsitional),
  • Lexer, Parser, EBNF (Compiler basics)
Mix of lecture (2/3) and practical exercies/project work (1/3)
Course: New Lecture
Internal number: EITB622A Type/mode: Lecture
Lecturer:
Prof. Dr. Christian Langen
Language of instruction:
English
Credits (ECTS): 2 Contact hours: 2
Assessment: Module exam
Content:
Recommended reading:
Comments: This course is either not offered in Summer semester 2021, or the date is not yet fixed in case of a block course.
Course: New Lecture
Internal number: I W502 Type/mode: Lecture
Lecturer:
Prof. Dr. Thomas Morgenstern
Language of instruction:
German
Credits (ECTS): 2 Contact hours: 2
Assessment: Written/verbal Exam 90/20 Min. (graded)
Content:
Recommended reading:
Comments:
Course: New Lecture
Internal number: I W927 Type/mode: Lecture
Lecturer:
Dr.-Ing. Wilfried Jakob
Language of instruction:
German
Credits (ECTS): 2 Contact hours: 2
Assessment: Written Exam 90 Min. (graded)
Content:
Recommended reading:
Comments: This course is either not offered in Summer semester 2021, or the date is not yet fixed in case of a block course.
Course: New Lecture
Internal number: I W928 Type/mode: Lecture
Lecturer:
Prof. Dr. Martin Sulzmann
Language of instruction:
English
Credits (ECTS): 2 Contact hours: 2
Assessment: Module exam
Content:
Recommended reading:
Comments: This course is either not offered in Summer semester 2021, or the date is not yet fixed in case of a block course.
Course: Robotics
Internal number: I W233 Type/mode: Lecture
Lecturer:
Prof. Dr. Björn Hein
Language of instruction:
German
Credits (ECTS): 4 Contact hours: 4
Assessment: Written/verbal Exam 90/20 Min. (graded)
Content:
Fields of application of industrial and service robots, kinematic types, coordinate transformation, kinematic modelling of manipulators, track design, sensorics, control architecture (hardware and software), methods of programming, programming languages
Application: Prior registration or agreement with a lecturer required
Recommended reading:
Lecture Notes and Literature
Comments: Lecture in form of seminar
Course: SAP Certification
Internal number: I W908 Type/mode: Lecture
Lecturers:
Prof. Dr. rer. pol. Mathias Philipp
M.Sc. Matthias Mruzek-Vering
Language of instruction:
German
Credits (ECTS): 2 Contact hours: 2
Assessment: Written Exam 90 Min. (graded)
Content:

TERP10: SAP ERP - Integration of Business Processes is a 10-day training course held at the universities participating in the pilot project. The students learn how the fundamental integrative business processes in procurement, production, planning, project management, sales, customer service, asset management, financial accounting, human resources, and analytics interact within the SAP ERP application.

The course provides students with a broad basic knowledge of the core business processes, business interrelations, and integration of business processes in SAP ERP.

At the end of the course, students take a certification examination. If they pass the examination, they receive an SAP certificate, which is a fully recognized qualification in the industry.

 

Recommended reading:

cource book

Comments:

10-day training: 

in the moring: theory
in the evening: laboratory

last day: SAP certification 
3 hours
multiple chioce and multiple responce questions
 

Course: Serious Games
Internal number: I W910 Type/mode: Lecture
Lecturer:
Prof. Daniel Schwarz
Language of instruction:
German
Credits (ECTS): 2 Contact hours: 2
Assessment: Written Exam 90 Min. (graded)
Content:
Recommended reading:
Comments:
Course: Softwareengineering Special Chapters
Internal number: I W342 Type/mode: Lecture
Lecturers:
Prof. Dr. Thomas Fuchß
M.Sc. Alexander Hasel
Language of instruction:
German
Credits (ECTS): 2 Contact hours: 2
Assessment: Verbal Exam/Concept 20 Min. (graded)
Content:

The course focuses on fundamental object-oriented design methods with an emphasis on design patterns and model driven concepts. The students learn to recognize, to know when to use, and to apply design patterns in varying situations in the context of an evolutionary development process. Furthermore the ability of an axiomatic rule base application of patterns, within a model driven approach, are discussed.

Recommended reading:

Slides, textbooks, and other literature:

Folien-Skript, Lehrbücher:

  • Gamma, Erich et. al. Entwurfsmuster: Elemente wiederverwendbarer objektorientierter Software - München : Addison-Wesley, 2001.
  • Buschmann, Frank. A system of patterns (Pattern-Oriented Software Architecture Volume 1) - John Wiley & Sons. 1996.
  • Schmidt, Douglas C. Patterns for concurrent and networked objects (Pattern-Oriented Software Architecture Volume 2) - John Wiley & Sons. 2000.
  • Michael Kircher, Prashant Jain. Patterns for Resource Management (Pattern-Oriented Software Architecture Volume 3) - John Wiley & Sons. 2004.
  • Frank Buschmann, Kevlin Henney, Douglas C. Schmidt. A Pattern Language for Distributed Computing (Pattern-Oriented Software Architecture Volume 4) - John Wiley & Sons. 2007.
  • Frank Buschmann, Kevlin Henney, Douglas C. Schmidt. On Patterns and Pattern Languages (Pattern-Oriented Software Architecture Volume 5) - John Wiley & Sons. 2007.
  • Fowler, Martin. Analysemuster: wiederverwendbare Objektmodelle: Ein Pattern-Katalog für Business-Anwendungen - Addison-Wesley-Longman. 1999.
  • OMG Object Management Group. Meta Object Facility (MOF) Specification - Version 2.4.1: OMG, 2011.
Comments:

The lecture will take the form of seminars with exercises.

This course is either not offered in Summer semester 2021, or the date is not yet fixed in case of a block course.